No. The figures shown are indicative price ranges intended to support early budget planning. The final quotation depends on the configuration selected and the specific requirements of the project.
Module-T modular containers currently range from €3,600 to €24,850, depending on the type of unit, its dimensions, and the specification selected for the project. The table below shows current indicative ranges for the three product groups with the most standardized configurations.
Module-T Container Price Ranges at a Glance
| Product Group | Typical Size Range | Indicative Price Range |
|---|---|---|
| Office Containers | 7 – 42 m² | €3,850 – €15,350 |
| Sanitary & WC Containers | 2 – 28 m² | €3,600 – €24,850 |
| Locker Containers | 7 – 14 m² | €4,150 – €12,650 |
Each range covers every standard and configured model in that group, from the most compact unit to the largest multi-module configuration. Where a project falls within a range depends on the dimensions, layout, and equipment selected.
Prices valid as of September 2026. The figures are indicative ranges for standard and configured units, not fixed prices for every project, and do not constitute a binding offer.
Why Unit Size Changes the Cost
Within every product group, the larger the unit, the lower its cost per square meter. Structure, delivery, and installation are largely fixed costs, so they are spread across more floor area as the unit grows. The effect is most pronounced for sanitary units, where plumbing and drainage do not scale down with size: a compact single WC cabin is the most expensive format per square meter in the entire range.
For project teams comparing modular building manufacturers in Türkiye, unit size and configuration should therefore be evaluated alongside the initial project requirements. Working with experienced Turkish manufacturers can also help determine how capacity, layout, transportation, and installation requirements affect the overall configuration.
The practical implication for project planning is clear: where the site allows it, one larger unit is usually more economical than two smaller ones, particularly for sanitary facilities. Module-T can advise on the most economical configuration for the capacity you need and support projects looking for a modular building supplier in Türkiye.
How Much Does an Office Container Cost?
Office container prices range from €3,850 to €15,350. The lower end covers compact single modules; the upper end covers larger units and multi-module office buildings assembled on site.
Standard configurations:
| Configuration | Floor Area |
|---|---|
| Compact office module (3.00 × 2.40 m) | 7.2 m² |
| Standard office module (6.00 × 2.40 m) | 14.4 m² |
| Large office module (10.00 × 2.40 m) | 24.0 m² |
| Extended office module (11.70 × 2.40 m) | 28.1 m² |
| Double module (6.00 × 4.80 m) | 28.8 m² |
| Modular office building, site-assembled | up to 42 m² |
All units are supplied with 50 mm sandwich panel walls and delivered assembled. Where a project falls within the range is set by the floor area, the interior layout, the insulation specification, the number and type of doors and windows, and the electrical installation. Heating, cooling, and security bars or shutters are available as options.
Review the full range of office container solutions to compare configurations, or modular office buildings for larger permanent offices.
How Much Does a Sanitary or WC Container Cost?
Sanitary and WC container prices range from €3,600 to €24,850—the widest span of the three groups, because a sanitary unit can be anything from a single WC cabin to a fully equipped block serving a large worksite.
Standard configurations:
| Configuration | Floor Area |
|---|---|
| Single WC cabin (1.43 × 1.43 m) | 2.0 m² |
| Compact WC block (2.68 × 1.43 m) | 3.8 m² |
| Small sanitary module (2.00-2.40 × 2.20-2.40 m) | 4.8 – 5.8 m² |
| Standard sanitary module (3.00 × 2.40 m) | 7.2 m² |
| Sanitary block (6.00 × 2.40 m) | 14.4 m² |
| Large sanitary block (11.70 × 2.40 m) | 28.1 m² |
Compact cabin formats are supplied with 40 mm sandwich panel walls, the larger modules with 50 mm. All units are delivered assembled. Accessible units for users with reduced mobility are available in the 3.00 × 2.40 m and 2.00 × 2.40 m formats.
Where a project falls within the range is set by the floor area, the number of WC cubicles, shower cabins, washbasins, and urinals, the plumbing and drainage arrangement, and whether a changing area is combined with the sanitary function.
Compare the available layouts in the sanitary and WC container range, or see modular bathroom units for permanent installations.
How Much Does a Locker Container Cost?
Locker container prices range from €4,150 to €12,650. These units are configured as personnel changing rooms and storage facilities and can be adapted to the requirements of the site.
Standard configurations:
| Configuration | Floor Area |
|---|---|
| Compact locker module (3.00 × 2.40 m) | 7.2 m² |
| Standard locker module (6.00 × 2.40 m) | 14.4 m² |
The same shell can be specified in very different ways, which is why this group spans a wide range. A sanitary installation with a WC and shower can be integrated, and the interior fitted with locker cabins, washbasins, toilets or urinals. Steel frame benches are available in lengths between 60 cm and 200 cm.
Locker quantity and type, bench configuration, insulation, the number of openings, and the extent of any sanitary installation all influence the final figure. See the locker container options, a modular locker room for larger facilities, or a portable drying room where wet workwear has to be handled.
Pricing for Other Module-T Product Groups
The ranges above cover the product groups with the most standardized configurations. Module-T’s wider range—accommodation and dormitory containers, canteen and kitchen units, security cabins, kiosks, container shops, and modular buildings—is quoted project by project.
For these products, capacity and equipment level matter more than floor area alone. Accommodation units, for example, are configured for one to twenty people, from 21 m² to 70 m², with sanitary provision, panel thickness between 50 and 100 mm, and finish level all specified per project.
Share the intended use, the approximate size or capacity, the destination, and the required quantity, and Module-T can give an indicative budget range before the technical specification is finalized.
What Affects Modular Container Prices?
Several variables change the final cost of a modular container project. The factors below have the largest effect, roughly in order of impact:
| Factor | Effect on Price |
|---|---|
| Dimensions and floor area | Drives material, structural, and transport costs together, and accounts for much of the difference within each product group. |
| Function and equipment density | A sanitary or kitchen unit costs considerably more than an office unit of the same size because of plumbing, fixtures, and ventilation. |
| Single or multi-module layout | Connected modules require site assembly, structural connection details, and, in some cases, engineering approval. |
| Insulation and panel specification | Panel thickness and insulation material are selected for the climate at the destination. |
| Doors and windows | Type, quantity, glazing specification, and security features such as bars or shutters. |
| Electrical and mechanical installation | Distribution boards, lighting, sockets, heating and air conditioning, and the standard applied at the destination. |
| Interior finishes and fittings | Flooring, partitions, furniture, lockers, and benches. |
| Quantity | Projects involving several units are assessed as a whole and quoted accordingly. |
| Destination and transport | Distance, shipping method, customs requirements, and local certification. |
| Installation requirements | Foundations, connection to utilities, craneage, and on-site assembly. |
Because these variables differ from one project to the next, a range is more useful for initial comparison than a single universal figure. Once the scope is defined, Module-T can provide a precise quotation.
Request a Project-Specific Quote
If you already know the container type, dimensions, or intended use, sharing your project details allows Module-T to quote against your actual requirements rather than a general range.
To receive an accurate quotation, please include:
- Product group and intended use
- Number of units required
- Preferred dimensions, or the floor area you need
- Destination country
- Required delivery date
For projects still at the concept stage, an approximate size and intended use are enough for an indicative budget.
FAQs About Prices
The ranges cover the container unit as described, supplied assembled with a steel frame and sandwich panel walls.
A 6.00 × 2.40 m office module—roughly the footprint of a 20 ft container—provides 14.4 m² of floor area and sits in the lower half of the €3,850 to €15,350 office container range. The exact figure depends on the interior layout, insulation specification, the number of doors and windows, and the electrical installation, so it is confirmed at quotation.
Dimensions, interior layout, insulation specification, doors and windows, technical equipment, sanitary requirements, order quantity, destination, and installation conditions all affect the final price. A project with non-standard requirements can fall outside the indicative range.
The ranges on this page cover office containers, sanitary and WC containers, and locker containers. Module-T’s other product groups—including accommodation, canteen, kiosk, security cabin, and modular building solutions—are quoted project by project.
Project quantity is one of the factors assessed during quotation. Share the number of units you need, and Module-T will price the project as a whole rather than per unit.
Share the container type, required quantity, dimensions, intended use, equipment needs, and destination through the Module-T quotation form. The sales team can then prepare a project-specific offer.